Step 1:
Once you have your STB power up and you can see the splash screen on the CRT monitor, right after pass the splash screen (not earlier) press SHIFT F10 to enter into REALTEK EEPROM setup screen:
(if you miss the REALTEK setup screen, repeat Step1)
Step 2: under Boot Order, use left/right arrow key to change the value to
'ROM Disable': DISABLE DHCP BOOT
'INT 19h': ENABLE DHCP BOOT
Step 3: Press F4 to save and exit
Step 4: Continue Step 1 to Step 3 for the 2nd LAN
|
